Why won't Radiant let me edit any verticies on a terrain patch or on curves?
Once you have the verts selected you need to make sure you hold the ALT and Left Mouse Button together while you click move the mouse. You cannot move the verts by only using the mouse.
Radiant はなぜ地形時期にあるいはカーブの上に私に verticies を編集させないでしょうか?
かつてあなたはあなたがあなたが一緒に ALT と左マウスボタンを持つことを確認することを必要とする選択された verts があなたがクリックする間にマウスを動かすようにします。あなたは verts をただ使用方法、マウス、だけのそばに動かすことができません。
I compiled my level and everything has a red tint. Why is it doing this?
Anything with a red tint indicates that it doesn't have reflection data. If your entire level is tinted red that means that you probably have not compiled the reflections for the level, or that you didn't have any reflection probes in the level when you tried to compile the reflections.
Reflection probes are very important for the look of all shiny things in the game. Place one per room and one in each distinct outdoor area and additional ones near any especially shiny objects. They use memory but its reasonable to have 10-100 of them.
After the BSP and Lighting have been compiled you will want to compile the reflections for the level. In order for reflections to be compiled properly the level needs to contain reflection probe entities throughout the map. Each reflection probe in the level will produce a cube map for that area during the reflection compile. The reflections used throughout the compiled level use the cube map from the nearest reflection probe entity so keep this in mind when you are placing the probes. The reflection probes use portals to determine which is the closest probe so you don’t usually need to worry about an inside probe affecting an outside model through the wall.
After you have compiled the lighting on your level be sure you have reflection probes placed throughout the level, then use CoD4CompileTools to compile reflections. Now your level should look good, and you should no longer have anything showing up as red.
私は私のレベルを編集しました、そしてすべてが赤い色あいを持っています。それはなぜこれをしていますか?
赤い色あいを持っている何もそれが反射データを持っていないことを示します。もしあなたの全部のレベルがあなたがおそらくレベル、あるいはそれを求めて反射を編集しなかったことを意味する赤に染められるなら、あなたが反射を編集しようとしたとき、あなたはレベルに反射プローブを持っていませんでした。
反射プローブはゲームの中のすべてのぴかぴかのものの外見のために非常に重要です。1つを部屋と1つ毎にどんな特にぴかぴかのオブジェクトの近くででもそれぞれの別の屋外のエリアと付加的(の・もの・人)に置いてください。それらはただ記憶装置を使うそそれらの10-100を持っているために、合理的.
BSPとライティングがコンパイルされた後、あなたはレベルを求めて反射を編集することを望むでしょう。反射が適切に編集されるために、レベルはマップを通じて反射プローブエンティティを含む必要があります。レベルを着ているそれぞれの反射プローブが反射コンパイルの間にその区域を求めてキューブマップを作り出すでしょう。反射は編集されたレベルの使用を通じて最も近くの反射プローブエンティティからのキューブマップを使いました、それで、あなたがプローブを置いているとき、これを念頭においてください。反射プローブは最も近いプローブである決定に入り口を使います、それであなたは通常壁を通って外からのモデルに影響を与えている内側プローブのことで心配する必要がありません。
あなたがあなたのレベルにライティングを編集した後あなたが反射プローブがレベルを通じて置かれるようにすることを確認して、それから CoD4CompileTools を反射を編集するために使ってください。今あなたのレベルは良さそうに見えるべきです、そしてあなたはもう赤として現われて何も持っているべきではありません。
I compiled my level and all of the models have a rainbow tint. Why is it doing this?
Rainbow models mean there is no grid data for them. You need to define the grid area for your level and recompile. More information is available under the Lighting Options category of the Compile Tools page.
私は私のレベルを編集しました、そしてモデルのすべてはレインボー色あいを持っています。それはなぜこれをしていますか?
モデルがそこに意味するレインボーはそれらを求めてグリッドデータではありません。あなたはあなたのレベルと再コンパイルを求めてグリッドエリアを定義する必要があります。もっと多くの情報がコンパイルツールページのライティングオプションカテゴリの下で利用可能です。
When selecting "Run Selected Map" from CoD4CompileTools on a multiplayer map, it loads the custom map but then goes to a different map. Why?
You are probably getting an error on your custom map but aren't seeing it. Before clicking "Run Selected Map" make sure you have "developer" and "developer_script" checked so that you'll see any error. If you run the game without developer and developer_script all errors will be hidden so you wont see what's wrong. It's always a good idea to turn these on when you think you may be having an error.
One of the possible causes for this problem is that you have omitted Spawn Entities in your map. Check this link for more informations on creating Spawn Entities: MP Mapping
マルチプレ-ヤーマップの上に CoD4CompileTools から「選択されたマップを走らせてください」を選択するとき、それはカスタムマップをロードしますが、それから異なったマップに行きます。なぜですか?
あなたはおそらくあなたのカスタムマップの上にエラーを得ています、しかしそれを見ていません。「選択されたマップを走らせる」をクリックする前に、あなたが「デベロッパ」を持っている、そして、あなたがどんな錯誤でも見るように、「developer_script」が調べたことを確認してください。もしあなたがデベロッパと developer_script なしでゲームを行なうなら、すべてのエラーは隠されるでしょう、それであなた習慣何が間違っているか見てください。あなたがあなたがエラーを持っているかもしれないと思うとき、それは常にこれらを向けるべき良い考えです。
可能な原因の1つはこの問題を求めてあなたのマップであなたが子エンティティーを除いたということです。子エンティティーを作成することについて、もっと多くの情報がないかこのリンクをチェックしてください:MP地図作成
I have a huge red FX model stuck on my face when I loaded my custom level, what's that all about?
This is caused by your zone_source csv file to be out of date. The game is trying to load an asset but it can't because the asset it's looking for was not in the zone_source\[levelname].csv file, therefore not getting compiled into the fast file. See the "Update Zone File" category on the Compile Tools page for more information on how to update your zone file with new assets. It's likely that anytime you place a new character into the game you'll need to update the zone_source.
私が私のカスタムレベルをロードしたとき、私は私の顔の上に動かなくなった巨大な赤い FX モデルを持っています、それはすべて何についてですか?
これはあなたの zone_source csv ファイルによって古いようにする。ゲームは資産をロードしようとしています、しかしそれはそれが探している資産が zone_source\[levelname].csv になかったから、従って高速のファイルに編集されないで、ファイルすることができません。どのように新しい資産を持っているあなたのゾーンファイルを更新するべきかについて、もっと多くの情報を求めてコンパイルツールページで「アップデート区間ファイル」カテゴリを見てください。いつでもあなたがアップデート、 zone_source 、にあなたが必要とするであろうゲームに入って新しいキャラクタを置くことはありそうです。
(Original:"http://www.infinityward.com/wiki/index.php?title=Frequently_Asked_Questions_%28_FAQ_%29")